Do you know How to Replace Hoverboard Battery? Hoverboards are the best fun gadgets in recent times. They are not just easy to use but are also safe to use. The only concern one may have is about its battery life. Although these devices are rechargeable, they can die at any time when using them with the wrong charger or overcharging them.
If you want to know How to Replace the Hoverboard Battery? then you don’t need to worry. Replacing hoverboard batteries is easy and not that expensive either. You can also replace your old battery with a new one, depending on the condition of your device. When it comes to replacing them with a new battery you should care about the battery type and make sure it fits the device.
Table of Contents
Why do Hoverboard Batteries Die?
Why do Hoverboard Batteries Die?
There are many reasons why a hoverboard battery dies. Following are the main reasons for hoverboard battery dead causes.
Overcharging
If you keep your hoverboard on charging overnight or for too long, then chances are that it will damage the battery and cause it to die. It is important that you never charge your device for more than 12 hours or leave it plugged in all the time. Leaving the device plugged in after full recharge can also result in damage to the battery and will cause it to die.
Read Also: How Much Do Hoverboards Weigh?
Wrong Charger
You should never use the wrong charger with your hoverboard as it can also harm the battery of your device and cause it to die. Similarly, you should know that all the ports on any electrical device are not equal so try to avoid using a damaged port.
Overheating
Overheat can also damage the battery of your device, which may cause hoverboard batteries to die. When you are using a hoverboard make sure that it is not too hot or in direct sunlight otherwise it can possibly damage the battery and cause it to die.
Hoverboard for long Duration
Hoverboards can be used for a long time and it is an electronic devices too. However, when you use it for a longer period of time then the battery may lose its power and die. You should avoid using your device when the battery is low or when there is no charger available to you.
Using Old Hoverboard Battery
Most people use old hoverboards for a longer period of time. If you are doing so, then you need to understand that it can harm the battery of your device and cause it to die. You should consider replacing an old Hoverboard battery with a new one if you want to know How to Replace a Hoverboard Battery. Replacing the battery of your device is not that expensive either so consider doing it. You can get hoverboard batteries at an affordable price.
How to Replace Hoverboard Battery? Step By Step Guide
How to Replace Hoverboard Battery? Step By Step Guide
Following are the steps you need to follow in order to replace a hoverboard battery.
Discharge the Lithium Polymer Battery
Before you open up a hoverboard in order to replace its battery, it is necessary for you to discharge it. This can be done by leaving it overnight so that any charge in the battery will be drained completely. But before you do this, make sure that your replacement batteries are fully charged, or else there will be a risk of short circuits.
Remove the Hoverboard Cover or Label
In order to replace a hoverboard battery, you need to remove the cover from the hoverboard that contains its batteries and label each one. If it is not labeled then label them yourself with a permanent marker so that you can easily identify where each battery goes when you are putting them back.
Remove the Battery Pack or Module
You need to undo the screws that keep the battery pack of your hoverboard together and then remove the pack carefully. If it is glued, don’t force it open as you might damage your batteries. After removing the cover, make sure that you hold on to each one of the batteries.
Swap the Batteries
After removing the old battery pack, insert each of your new batteries and make sure that they snap back in their places securely. Then put the cover back on and secure it with screws.
Charge Your Hoverboard Back to 100%
Before you start using your hoverboard again, make sure that you charge it completely. This is because the new battery pack might not be charged up to 100% and this can result in a short circuit if the hoverboard is started before it is fully charged.
If you follow these steps, then replacing a hoverboard battery will be a much easier process for you to go through.
How to Select New Hoverboard Battery – Step By Step Guide
How to Select New Hoverboard Battery – Step By Step Guide
Following are the steps you need to follow while selecting a new hoverboard battery for your old hoverboard.
Keep your old batteries
You will need to keep the old batteries with you while purchasing new ones. This is because you would want to test if they are compatible or not by simply swapping out the batteries between the board and the scooter.
Look for a Certified Seller of Hoverboard Battery
While buying a replacement hoverboard battery, make sure that you are buying it from a certified seller or an authorized dealer. This is because the Chinese-made hoverboard battery is often risky for both the scooter and rider’s health since it could catch fire any time soon.
New Hoverboard Batteries should be UL 2272 Certified
UL certification is basically granted to batteries that can meet a high level of performance. This is because these batteries can be used for both indoor and outdoor use with complete safety. UL 2272 certification also means that a hoverboard battery has a feature of protection from dust, dirt, and water as well.
Do not buy Chinese-Made Hoverboards Battery
No matter how much you are looking to save money, never buy a Chinese battery for your hoverboard. This is because they are considered a fire hazard and have been banned by the U.S Consumer Product Safety Commission.
You can check out from eBay before buying a Hoverboard Battery
eBay is one of the most trusted online selling platforms in the world where you can buy almost anything. You can also go through different hoverboard battery reviews to buy the best quality product that is UL certified and available at a reasonable price range.
Check out Hoverboard Battery Price before buying it
Before adding any hoverboard battery to your shopping cart, you need to check out their prices on other websites too like Amazon or eBay because prices on these websites are often competitive.
Never keep your hoverboard overnight on Charge
Even if you have charged your scooter completely, it’s better to unplug and detach the charger as soon as possible. If you let it charge overnight, there is a chance of overcharging which could cause damage to the battery and reduce its lifespan.
Charge your hoverboard on a flat surface
Make sure that if you are charging your hoverboard for the first time, then do it on flat ground or a platform where the charger can be plugged easily. This is because if you plug the charger in on some uneven surface, it may lead to malfunctioning of the battery and even reduce its life.
Do not leave your batteries in high temperature or humidity
You should keep the batteries of your hoverboard away from direct sunlight, heat, or humid conditions as this could cause damage to the cells to present inside it. The best idea would be to store them in a dry and cool place. Also, avoid bumpy rides on an uneven surfaces.
How to Dispose of the Old Hoverboard Battery?
How to Dispose of the Old Hoverboard Battery?
Following are the steps you need to follow in order to Dispose of the Old Hoverboard Battery.
These are the simple steps you need to follow, but it is advisable that you contact your local solid waste management company for specific guidelines.
Steps to be Followed for Disposing of the Old Hoverboard Battery:
- You need to clean up the area around where you will be working. You should also put on safety glasses and rubber gloves.
- Take the old battery pack and place it on a non-flammable surface. You should never put the old hoverboard battery on your kitchen counter since some kitchens have hardwood floors that can easily catch fire from spilled fluids from your replaced battery.
- Make sure all flames are extinguished before you proceed further. Never use water for this purpose.
Make sure to wear eye protection and gloves when handling the old batteries. If you have skin contact with the battery fluid, then wash your hands thoroughly. Flush eyes immediately if any acid contacts them.
Proceed to open the battery cover by using a screwdriver or a similar tool. Inside the compartment, you will find eight screws that need to be removed. - Take out the battery cells and save each one carefully as they cannot be replaced. You should carry these batteries to a recycling center or to a collection site that is authorized by your city or county government to handle them. These batteries can sometimes explode when mishandled, so you need to take every precaution while handling them.
Once you have removed all the cells, you need to remove any plastic or other flammable material from the inside of your hoverboard.
FAQs
FAQs
Q: Is it necessary to purchase the same type of battery as my original?
A: When possible, use the exact same size and type of battery. If you are unable to find an exact match, many times a similar-sized or mAh (milli-amp hour) model will work just fine. Lithium-ion batteries are the easiest type of batteries to adapt.
Q: How do I make my new battery fit where the old one was positioned?
A: Make sure the new battery is as flat as possible to help it fit into place. For those not familiar with hand tools, DO NOT use a hammer or mallet to pound something into position. You will damage and distort your new battery and could injure yourself in the process.
Q: What if I need more than one battery?
A: This is the most important question. If you need to replace both batteries, you must purchase two of each type and model number that you are replacing.
Q: Can I use a battery from another product in my hoverboard?
A: No, this does not work and batteries that are for other products will not fit your hoverboard.
Q: What is the difference between Lithium Ion (Li-ion) and Lithium Polymer (LiPo)?
A: Both these types of lithium-ion batteries are made from lithium, but there is a difference in the electrolyte that holds electrical energy. This type of battery also has a solid electrolyte rather than a liquid one.
Conclusion
Conclusion
We Cover each and every detail about How to replace hoverboard batteries in this detailed guide. Replacing the batteries is a very simple task that takes only a few minutes, but you need to make sure that you have done everything correctly. If the safety guidelines are not followed properly, then there is every chance of injury.