(Last Updated On: November 20, 2021)
It’s critical that your Acer Iconia Tab 10 A3-A30 is properly charged since if it isn’t, you won’t be able to use it when the battery runs out. However, we’ve already had a few reports of customers’ brand-new phones failing to charge. Others stated theirs weren’t charging correctly, while others said they couldn’t fast-charge at all.
Charging troubles are one of the most prevalent complaints reported by Acer smartphone customers, so it’s not surprising that we’ve gotten several messages from early adopters of Acer’s new device concerning this issue.
As technicians, we already have troubleshooting methods in place that we employ when attempting to resolve issues for which we are unsure of the root cause. So, if you merely told us that your phone stopped charging for no apparent reason one day, we recommend that you use the troubleshooting method below.
There is no need to troubleshoot for owners whose phones have been damaged by fluids or physical force. Instead, take your phone to a specialist right away and get it checked.
Basic Troubleshooting for the Acer Iconia Tab 10 A3-A30 Not Charging Problem
1st step: Perform a Forced Reboot
If the problem appeared out of nowhere, it’s possible that the system crashed, especially if the phone is unresponsive or turns off on its own and doesn’t respond when the power key is tapped.
The first and safest course of action is to press and hold the Volume Down and Power keys simultaneously for 7 to 10 seconds. If there’s still enough power remaining in the device and we’re correct about the system crash, it should start up normally once you’ve completed the procedure. After that, you should be able to charge the smartphone regularly using the original charger.
2nd step: Make sure the charger and USB cord are in good working order
If the phone responds normally but does not charge when plugged in, the next step is to inspect the power adapter and the cord that connects the charger to the smartphone. Here’s how to do it:
Check the charger’s port for anything that could be obstructing the cable, such as dirt, lint, or anything else that might be preventing good contact between receptors. Also, make sure there isn’t a bent pin. If there is, you should be able to straighten it up with tweezers or, for that matter, a toothpick.
Carry out the same procedure with the cable, only you must inspect both ends. If there’s a bent pin at the end that connects to the phone, you won’t be able to straighten it out. In this situation, you’ll need to get a new USB cable or a Acer charger kit that includes the power adapter.
If the cable breaks, you’ll need to purchase a new one. Remember that the power cable is the only connection between the charger and your phone, so if it’s missing or broken, the device won’t charge.
3rd step: Check your phone’s USB port
If the device still won’t charge after you’ve done the Forced Reboot and checked both the charger and cord, it’s time to examine its utility port. Look inside to check if there’s any lint or dirt preventing the cable from making proper contact with the receptors. If you don’t find anything, move on to the next step.
4th step: Use a new charger and/or cord to see if it helps
If you know someone who has the same phone as you, borrow his or her charger (including the cord) and see if your phone charges; if it does, your charger is the problem. You’ll have to get a new one.
If your phone still won’t charge, the problem is most likely with the battery or the phone itself.
5th step: Use a wireless charger if possible
Before sending the phone in for repair, try charging it with a wireless charger to see whether it accepts electricity through a different means. If this is the case, the issue may be with your device’s USB port rather than the battery or a hardware issue.
If the gadget won’t charge wirelessly, consult a professional; otherwise, attempt the following step to further investigate.
6th step: While charging, try holding the smartphone at various angles
To test if the phone charges, plug in the cord and hold it at various angles. It’s only a question of placing the phone so the cable makes touch with the receptors if the USB port is loose. You may also try moving the phone’s end of the cord up and down or sideways. It’s only a loose connection if the phone shows the charging icon at times. Unfortunately, you have no choice except to leave it in the hands of the specialist.
Other Acer Iconia Tab 10 A3-A30 Charging Issues
Now that you’ve seen how to fix a phone that won’t charge, let’s look at some additional charging issues you can find with your new gadget.
The Acer Iconia Tab 10 A3-A30 isn’t charging correctly.
When the charger is plugged, the smartphone responds, but it keeps disconnecting and rejoining, especially when moved or even gently touched during charging. This behavior indicates a problem with the connection between the phone’s receptors and the cable’s receptors.
You must hold the smartphone at a specific angle or ensure that the cable is correctly inserted into both the phone and the charger.
The charging speed of the Acer Iconia Tab 10 A3-A30 is really poor.
The reason for sluggish charging is when the phone has a lot of apps open in the background. Others may propose closing such apps, but it would be inconvenient, especially if there are a lot of them, so if you want to keep using your phone while it charges, I recommend booting it into safe mode. You may even turn it off while it’s hooked in.
Instead of charging, the Acer Iconia Tab 10 A3-A30 consumes its battery.
One of the most prevalent charge difficulties is this. Even when it’s plugged in, the gadget drains the battery faster than it can replenish it. It’s a different version of the “slow charging” problem in that it doesn’t charge at all, but the reason might be the same–tons of applications running.
If you’re having trouble, try starting your phone in safe mode or turning it off while it’s charging.
After becoming wet, the Acer Iconia Tab 10 A3-A30 won’t charge.
It is not waterproof, however, it is resistant to water. As a result, liquid can still get into it in some way. If your smartphone stopped charging after becoming wet, it’s possible that water got inside. Don’t bother troubleshooting in this scenario. Instead, turn your device off and do not try to charge it again. Then go to a technician and have him check it out for you.
I hope that our troubleshooting guide, as well as our suggestions for various charging issues, may be of use to you.
Frequently Asked Question
“Acer Iconia Tab 10 A3-A30 Not Charging” after Acer update?
If you have been using android devices for a long time, these types of errors are well known. It is a big disappointment that the phone does not work when updating to improve the performance of the phone. This could really be. It may be something that came from the cache rather than an error that could have come from the update. All you have to do is clear the cache first. If this does not solve your problem then you have to go back to your previous android version. This guide will help you. – How to Flash Stock Firmware on Acer Iconia Tab 10 A3-A30
Acer Iconia Tab 10 A3-A30 Not Charging” after Installing Custom Firmware?
class="has-text-align-justify">All you have to do is follow the step-by-step guide above. If the above guide did not help, you are in serious trouble. This problem occurs when you flash custom ROMs with beta versions. This is because these custom firmwares are still being tested and some features are not working properly. Now you have two options to solve this problem, you can switch to another supported custom ROM, or you can flash the original Stock ROM that came with your device.
Acer Iconia Tab 10 A3-A30 Not Charging after water damage
Did you swim in the pool with the phone? Or is the phone wet in the rain? All you have to do is follow the steps below without shaking the phone. You can dry your device via 3 methods.
- Leave the phone in a dry place for 2-3 hours to evaporate the moisture.
- Use a hair dryer to remove any liquid from the device. (Do it at your own risk)
- Keep the phone in a bag full of rice for about 48 hours.
It does not work? follow this linkDevice Back after water damage
Acer Iconia Tab 10 A3-A30 Not Charging after a drop
If the display is not damaged, you still have a chance. Follow the steps above. If those steps do not help, it means that your phone has a hardware problem. This means that you need to take your phone to an expert for repair. You can repair it yourself, but it will require the tools, parts, and expertise you need to do it properly, and if you do, it will only increase the risk and void the warranty. Read More : How To Fix Android Device Not Turning On After Drop
“Acer Iconia Tab 10 A3-A30 Not Charging” after after screen / repair / replacement
This is most likely to happen if your display or phone has been repaired by an amateur. Follow the steps above. If those steps do not help, it is more likely to be a hardware problem. It is better to go to an authorized service center and have it repaired.
Contact Us
Do you think this “Fix Acer Iconia Tab 10 A3-A30 Not Charging & Other Charging Issues” article is useful? If so, please share this article on social media sites including Facebook, Twitter. Your questions, ideas, and suggestions are welcome. You can describe your problems in the comments. Also, you can join our community and open the Help topic under Android. It’s completely free! Thank you so much! have a great day!